Thread: NismoTronic Tuning Software for TunerCode

What's new in this update?

dont be a pansy, just get an adapter and run OBDI, or if you have emissions stuff to worry about, wait for a b14 board

There are only a few additions that are very minor to this update.

The Reg key generation is a little different and it now includes the E60 vq in the maf data folder.

Other than that, I am not going to update the program much until I get my hands on the realtime board... that is when all the new updates will happen!

Just to clarify, if I currently have a obd2 ecu with a tune on it, and I want to downgrade to obd1, I cant download the current tune (obd2) and use it on the obd1 ecu as the starting point?

Unfortunately no. The 2 have totally different fuel calculation methods and the maps and tables are not compatible.

Dave

what you can do, is manually copy the the timing/fuel/ect maps over cell by cell, I did this with some b13 tunes for my b14 realtime ECU

I copy timing tables to excel then back into TunerPro. As for fuel tables, it's like Dave said, they are calculated differently. OBDII you will see target AFR's (14.7), OBDI you will see numbers in 100's.

oh right, good call on the fuel maps, I must have just been copying timing

Hmm...so it looks like I'm on the hunt for a new tune to start out with once I get a realtime... good stuff.

I worked on the program a little bit last night as I have a couple cars that I am tuning with it this week.

I added parameter table tracing so you can see exactly where you are in every table while it is being logged and played back.

I was thinking about coloring the parameter tables from white to red or green to blue similar to how the fuel/ignition tables are done.

If anyone has any suggestions, please let me know!