Thread: How to install TDMImports Rigid Collars

Sounds good bud. I'll be in for a set as well since I have the car on jack stands already, this will be easy.

Thanks for the write up Sentraga!

Looks good! Next I think you should do a write up on the Whiteline brace once you get it from me as I have had numerous people ask for pics/how to install it.

Holy crap! Something that actually helps with the looseness of the b13!!!!!! I dig it!

per the video... I thought you installed them b/t the subframe and the frame?

You're welcome


I'll do that as soon as I get it and will give specifics as to what hardware is also needed in case anyone needs that also.


They would if the frame and subframe was bolted together like in the video, but our cars aren't like that. The frame has studs where you use a nut to secure the subframe to it.

Regardless, yea I guess you could place them on top of the subframe. They would serve the same purpose though and I dont know about you but I wasn't about to drop my spindles, control arms, or entire subframe to put them on top.
They still center the subframe

does the subframe really move around in our cars?

its not that it moves, but rather that bolting it up properly centered is nigh on impossible due to the design, these correct this problem

.....phone.....

Keen on buying a set! Let us know!

Hmmmm..I just may get this.

EVO 3D

If I remember correctly that's how the suspension technics sway bars came.