Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: **Z32 Calipers in a B13**

+ Reply To Thread
Posts: 201-210 of 214
2013-03-28 18:53:42
#201
Can't wait to install my setup!
2013-04-02 04:21:57
#202
[url='http://www.sr20-forum.com/dbtgallery.php?do=view_image&id=223&gal=gallery'][img]http://www.sr20-forum.com/dbtgallery.php?do=gallery_image&id=223&gal=gallery&type=thumb[/img][/url]
2013-04-04 21:28:45
#203
your pad spring is in upside down. the humped part goes downward.
2013-05-04 19:29:20
#204
Originally Posted by alexrex20
Just about ready to go on the car. Just waiting for the new wheel bearings and caliper rebuild kit.

30mm calipers from a '91 300ZX Turbo (Z32)


Spindles/hubs from a '00-06 Sentra (B15); will work from any B15, whether base or SE-R


Rotors from a '00 Mazda Millenia; 274x28mm (will only work with 30mm calipers!)


The rotors need to be redrilled for 4-lug


All assembled. Alignment is just about perfect.


For anyone that says they don't sit square on the rotor: Pics don't lie. The caliper has perfect alignment and the pads sit square as well.




Assembled!


Comparison vs. stock brakes


You ever get to installing these? That rotor looks like a good option to use as well.
2013-06-17 02:42:45
#205
Hi guys.

Anyone has tried (or know) to install the calipers of Mazda RX-7 con Nissan P11 2001 or above?.

Regards.
2014-04-26 05:01:04
#206
OK so for all you guys who have done this swap:
What bolts are you using for the hub to caliper?

I went to Nissan for OEM Z32 bolts, besides being uber expensive (and unreturnable), they're also too long and dont seat all the way anyways.
I know it's an M12x1.25 bolt, just unsure of the length and where to get them. Any help would be appreciated.
2014-10-08 22:53:54
#207
So wish way is the right way to do this ? im actually doing this into a B12 i really need some stopping power.
2014-10-09 00:15:03
#208
Originally Posted by no
So wish way is the right way to do this ? im actually doing this into a B12 i really need some stopping power.


B15 hubs up front with the 1990 Infiniti M30 to stay 4x114.3
Last edited by Sentraga on 2014-10-09 at 00-22-49.
2014-10-09 03:09:17
#209
Originally Posted by Sentraga
Originally Posted by no
So wish way is the right way to do this ? im actually doing this into a B12 i really need some stopping power.


B15 hubs up front with the 1990 Infiniti M30 to stay 4x114.3


This is my setup,too except I have the whole B15 knuckle which gives you slightly larger wheel bearing from my understanding....I am guessing thats what you mean since the calipers wont bolt to the B13 knuckle?
2014-10-09 22:24:09
#210
Yea the b15 bearing is larger and is a sealed bearing, as opposed to the smaller open end bearing the b13/14 uses.

But what I was referring to was not having to redrill anything.

Also, Autozone carries 35mm 12x1.25 grade 10 bolts that you can use for this; don't forget lock washers.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top