Thread: **Z32 Calipers in a B13**

x2!

I just about have mine complete. i just have to bore out the center of my wheels to fit the bigger hub, and get brakelines. I will post some pics in a little while, i just have to load them onto my computer.

[img][IMG]http://i123.photobucket.com/albums/o305/orionkc1/DSCN2281.jpg[/img][/IMG]
Z32, AD22, and AD18
[img][IMG]http://i123.photobucket.com/albums/o305/orionkc1/DSCN2282.jpg[/img][/IMG]
[img][IMG]http://i123.photobucket.com/albums/o305/orionkc1/DSCN2283.jpg[/img][/IMG]
I will probably bolt them to the car tomorrow, if im not to busy.

you're using redrilled maxima rotors, 26mm calipers and B15 knuckles, right?

also... do i see some sort of spacer/bracket between the mounting ears and the caliper?

i want to do this soo bad, but not with a B15 knuckle.... you didnt happen to check to see if you can swap b13 hubs into B15 knuckles, did you?

Yah i just redrilled the 2001 maxima rotors and took 4mm off the diameter. i had to make some .1875 thick spacers also. The B15 hubs were 4x114.3 so i pressed out the hubs and redilled them 4x100, installed new wheel bearings and studs to.
Sorry i didnt check the hubs. i only had the new hubs with me when working on them. If i think about it, i will check them tomorrow.
Why is every one afraid to get the new knuckles?
I got mine for $140 shipped off ebay. Its alot easier then trying to weld new mounting lugs on the old knuckle.

not everyone has universal 4 lug wheels.

I dont have universal 4 lug wheels. Thats why i pressed out the hub and redrilled it 4x100,and installed new wheel studs and bearings. i will post some pick of the hub tonight.

We have determined this is not a product we will try and produce. For the cost of a Wilwood kit you are much better off.
To make a bracket would require welding to the cast material which is unsafe. I would not recommend the B15 knuckle upgrade due to the incorrect caliper placement.

We will be designing a Wilwood kit for the B14 in the future to work with Dynalite calipers. We are shooting for a $50-100 bracket kit price and then you may piece it together to save some $$

lol whats so incorrect about the caliper placement on the b15 knuckles...?

^^ X2 they look the same as the B13/B14 to me.

I'd convert to 4x114.3. also, you can use Z32 Circuit Sports 26mm Front rotors, they're drilled for both 4X114.3 and 5x114.
300zx calipers will still be cheaper than Wilwoods.