Thread: **Z32 Calipers in a B13**

yeah. Or see if the brackets will be made. I have a spare P10 sitting around but they use a whole different front suspension.

/\ Thank you.

OK so here is a part list revision...

So if i do this set up will it work:
FRONT

• Spec-V Brembo Calipers
• B15 steering knuckle & hubs
• Spec-V Rotors
  

REAR

• p10 rear hubs
• p10 Brembo rotors
  

And the knuckles and hubs can be from any B15 correct?

If you drill 4x100 lug pattern in the b15 hub you will have matching lug patterns.

Its not a problem. I actually sort of want to go 4x114 instead of 4x100. Lower offset wheels are made in the 4x114 pattern so I could just be interchangable with the 240 guys...

My NX axles will work fine sitting in those hubs or will I have to use G20t axles? (aren't they a little thicker?)

You should be able to see why they wont work with just a bracket. The mounting lugs would have to be cut off and new mounts welded on. Which in the end would cost more and would be more hassel then just getting B15 steering knuckles. Getting the hubs redrilled to 4x100 shouldnt cost more the about $60 or $80 unless they are ripping you off.
[img][IMG]http://i123.photobucket.com/albums/o305/orionkc1/B13z32.jpg[/img][/IMG]
[img][IMG]http://i123.photobucket.com/albums/o305/orionkc1/B13z321.jpg[/img][/IMG]
[img][IMG]http://i123.photobucket.com/albums/o305/orionkc1/B13z322.jpg[/img][/IMG]
[img][IMG]http://i123.photobucket.com/albums/o305/orionkc1/B15B131.jpg[/img][/IMG]
B15 hub is on the left
[img][IMG]http://i123.photobucket.com/albums/o305/orionkc1/B15B132.jpg[/img][/IMG]
B15 hub is on the left

Im useing redrilled 2001 maxima rotors. they are 26mm x 280mm.
[img][IMG]http://i123.photobucket.com/albums/o305/orionkc1/rotors1.jpg[/img][/IMG]
[img][IMG]http://i123.photobucket.com/albums/o305/orionkc1/rotors2.jpg[/img][/IMG]

B15 sterring knuckle and Z32 caliper
[img][IMG]http://i123.photobucket.com/albums/o305/orionkc1/SKwZ32.jpg[/img][/IMG]

where did you pick the knuckle up from and what model is it from?

EBAY! LOL they were about $70 each shipped. Mine are off a 2006 1.8 sentra. Im guessing that all the B15 steering knuckles are all the same. I couldnt find anything saying they were different.