Thread: Looking for roller rocker sr20 bottom end or block for my ve

Hey guys ... im looking for a 2.0 roller rocket bottom end or internals for my ve ... if u know of anyone that may have one post it there thanks

Why do you want the roller rocker bottom end so bad? My buddy has a couple of complete sr20 blocks if you need one.

Also, dont you have 16ve or N1 cams? If you have 16ve or larger cams, you are going to have clearance issues with de pistons.

im not sure anymore if i have a n1 or not but i have told i do and i have been told i dont ... i know its a sr16 i saw a link with the same stampings i have on my block on a n1 engine all the numbers were the same ... i have to get the pistons cut so the valves wont hit but if i use a roller rocker bottom end all i have to do is just that and slap the head on the bottom end ... can u find out how much he would want for one ? thanks alot

Get a caliper or micrometer, pop your valve cover off and measure the lobes on your cams so you can be sure what you have. Here are the measurements in this thread, they are just measured from the bottom of the lobe, to the top of the lobe.

http://www.sr20forum.com/sr20ve-sr16ve/196577-stock-cam-info.html

i got one got to find it tho .... on the sr16 cam it looks like the coating on the center of the cam is blue and yellow correct ? cause the ones on my ve r green and red

There are absolutely no markings that can identify what cams you have. The only way is to measure.

yeah im aware of that but im just telling u what i see right now cause im not about to take off my valve cover right now lol

But what I'm telling you is, I can't say yes, the colors on the sr16ve cams are blue and yellow because that could be true for one set and different colors for another set. Or no colors at all for another set. You could have blue, green, yellow red, colors on 16ve, 20ve, N1, 20V, vet cams in any combination.

i just checked them at my cousins shop over here ... couldnt find my micrometer so i went to his shop to barrow his ... the small lobe measured 37.503 and the big lobe measured 39.501 ... if it was calibrated correctly i guess i do have n1 cams .... YAY