Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: NEED HELP....turboing issues

+ Reply To Thread
Posts: 1-5 of 5
2011-01-30 19:00:15
NEED HELP....turboing issues
Here's the problem i have basic board that i recently bought the program on it was for 370's, 4bar, DE maf. on JDM DE. Before turboin the motor ran fine NA until fuel pump went out on stock ECU. Now i have new chips for same setup but for Z32 maf and still having issues. I not sure if issues are with ECu or engine. Car starts and idles but running rich, rev it idel drops and stalls out. Was wondering if any one is running same setups w/out any issues and if you did have issues at the begining what you did to solve them?
Any help at this point would be helpful so that i dont ditch the whole projects.
2011-01-30 19:01:38
you may want to move this to the turbo section...

are you running a z32 ECU with a stock MAF?
2011-01-30 19:07:52
yea just made copy and posted there...........................no running two different programs one for DE maf and one for Z32 maf but both programs are producing same results ......
2011-01-30 21:21:53
make sure your maf wiring is perfect and ground it to an external ground rather than the factory harness ground. thats what i had to do. solved my problem!
2011-01-30 21:42:06
No duplicate threads please...
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top