Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Pull-A-Part Atlanta Metro

+ Reply To Thread
Posts: 141-150 of 211
2011-09-26 05:54:24
#141
Originally Posted by TrackJunky82
Lol at the courteous remark. I did some of that myself today. Put bolts back where they belong, put the bumper support back in place and closed the hood for rain.

I picked up the rad, front bumper+lower lip, left and right front fenders.

The door panels look in decent shape. Headliner is in good shape no sag. Some of the interior plastic is still available and look in good shape. The key code is still available in the glove box just in case some of you want those doors and hatchback.

The trunk cover is missing the pegs that hold it in place. It seems like all NXs have those things break off.

From digging around inside it seems that a woman last owned this car. Also from the license plate I think it was sitting since 2006. There is a fair amount of plant debris that has collected on the car. I wonder why it was taken to the yard.


Lol at the courteous remark. I did some of that myself today. Put bolts back where they belong, put the bumper support back in place and closed the hood for rain. (Yeah, lol. It's nice when PPL do that, so you can find stuff that's still there.)

The trunk cover is missing the pegs that hold it in place. It seems like all NXs have those things break off. (Yeah they were gone when I went up there Friday. I got the clips that the pegs pop into. Those pieces break easy too.)

I wonder why it was taken to the yard. (Ditto man. I would've bought that car outright. With a little work it looked like it could've ran again.)
2011-09-26 23:20:29
#142
lol, I got the pegs for the trunk cover, mine had broke. I guess I shoulda got the clips too. Well, learned something new. Once I took my first load of goodies I went back in to get more. As I was leaving the check-in clerk asked me if I raped it. I told him nah, just another day at pullapart.

Im gonna go back wednesday and see if theres anything left. I hope another b13 comes in by then. North lot seems to be a little low.
2011-09-27 02:21:35
#143
I'm friends with 3 of the guys who work there. They said when it came in, it was not running. They tried to start it but it wouldn't run at all.
2011-09-28 00:14:02
#144
Anyone know if the speed sensor is still there?
Latez
-Dave
2011-09-28 00:42:38
#145
You mean mechanical speedometer? Only the 93 and 94 cars had the electrical speedo. If you want the mechanical sensor it was still there when I was there on sunday. Those are very hard to get off from what I've encountered. It would probably be good to have the transmission off the car. Also I've read maybe nylon wire is good to get in there and be able to pull.
2011-09-28 02:44:22
#146
Originally Posted by blairellis
Can someone snag me the radiator retention brackets that bolt to the radiator support bar near the hood latch on that NX?

If there is a P10 I need a CABLE DRIVEN speedo (91-93 NOT 93.5+).

I also need one chrome closed end lug nut from a P10 if possible.

PM me for more details or text me at six one six six one seven zero five two three.


Bump?
2011-09-28 17:28:23
#147
Blairellis, if im out there I can grab them for ya. Those upper rad mount brackets are the same on the ser and even p10. The rubber mounts that fit inside the metal brackets are only a few bucks from the dealer but im not sure about the brackets themselves. Usually the rubber is shot, but I will check outs whats available at the yard here.
2011-09-29 01:13:12
#148
The NXs have different brackets than the SE-Rs. The NX uses top mounted nuts. The Se-R uses front mounted studs.
2011-11-27 05:06:07
#149
Hey guys I went over the Atlanta North today. There is a 99 P11 Automatic on the lot. Has rollover damage on the roof and passenge side. Not sure how many miles it has as the cluster was removed. The engine is intact as the car just got there this week. The engine doesn't look great though, maybe somebody can use it for a rebuild.

Also there is a 94 Q45 there with 107,000 miles. Still has the injectors in place. Two sets of 370cc injectors waiting to be grabbed for whoever wants them. The leather interior still looks kinda good on that Q45 as well.
2011-11-27 05:38:28
#150
are there any 6 speed spec-v's there?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top