Thread: NiismoTronicSA Software Demo

This video shows an example of how to use a grounded input to switch map and switch boost levels with the new NismoTronicSA software with the new TunerCodeSA firmware!

There are so many combinations of how you can use the inputs and outputs so you can setup map switching and boost levels just the way you want it!

TEASE!!!! lol

Sooooo.... when do we get it?

Sent from my Galaxy Nexus using Tapatalk 2

I think it will be soon.

Updates? Started the car the other day and waiting for this update before i go to the dyno.

I want some NEMU in my car!

John,

Will we be able to set it up so that if the A/F ratio goes above a desired level it will lower the boost to spring pressure or low boost to save our motors.

By a/c switch are you talking about air conditioning? If so what if your running a/c.

You can use the "other limiter" to induce a rev limit if the a/f ratio goes above where you want it to help save the engine from a lean condition (FPR vac lines blows off, leak at injector or any other condition).





Yes, I am talking about the air conditioning input switch at the ECU.

If you are runnign A/C you can use any of the other available inputs to do the switch, it is NOT limited to just the A/C switch.

I have a lot to learn about this new software. It will be able to do so much things. It's almost too good to be true.