Thread: Feature Request - New Feature Log

Thats a great idea too john, I just like to keep my eyes on the road hehe.

how about traction control??? lol

I added this in today and actually went through and am going to be adding more logging statuses (Disconnected, Connected, Recording, Review, and Playback) will now be displayed to show the mode you are in.



This is tricky as it would require a wheel speed sensor to be hooked up to your non-drive wheel or even both wheels to compare wheel speeds. It is a little more complicated than what it might seem.

Yeah, i have racelogic traction control, it has 4 inputs from the abs sensors, works well, but most ecus would struggle to have enough inputs to make it doable i think

Hey John, how about some of the tabs be auto expanded? IE Idle, you click on the tab, then have the click the teeny tiny little + symbol to be able to see the items listed (or double click)

Some tabs only have one or 2 items on them, so they could be set as auto expanded, so that you dont need to expand the sub tabs to see the various items in there, limiters, boost control, idle, closed loop etc.

I would like to see the wideband sensor warm up timer be increased. My MTX-L takes nearly 20 seconds to warm up but the max alloted warm up time is 12.75 seconds.

This causes my engine to enter closed loop with false readings for 7 seconds or so.

The maximum allowed time should be 25.5 seconds (25500 msec). I'll have John take a look at it.

Dave

Seconded! I also have a MTX-L that causes a check engine light, since the max time is 12500ms. Would be awesome to get that fixed!

I just released an update that increases the time to 25.5 seconds .. let me know if this works for you guys!

The update works good. Thanks for the quick fix guys.

will you add go1 an go2 from generic outputs to the mil output triggers plz