Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: New SE-L owner!

+ Reply To Thread
Posts: 21-30 of 52
2014-01-04 08:02:37
#21
The 95-97 cat converters are also different in length size than the 98-99 cats.

Also, I actually have a stock oem Nissan (made by Alpine) 3 disc changer in-dash on my 98.
2014-01-04 08:05:41
#22
bizarre, ive never seen one of those. for OP, if you have the NX brakes its just the fronts b/c the rears are the same
2014-01-04 08:23:17
#23
Originally Posted by jet
lso, I actually have a stock oem Nissan (made by Alpine) 3 disc changer in-dash on my 98.


Pics ???
2014-01-04 18:52:33
#24
Originally Posted by jet
The 95-97 cat converters are also different in length size than the 98-99 cats.

Also, I actually have a stock oem Nissan (made by Alpine) 3 disc changer in-dash on my 98.


Thanks Jet. Which Nissan HU are you using. Something like that sounds perfect!

Any b14 SE-L peeps have any suggestions for the exhaust?
2014-01-04 18:54:19
#25
Originally Posted by Storm88000
bizarre, ive never seen one of those. for OP, if you have the NX brakes its just the fronts b/c the rears are the same


Thanks man. I thought so, but wasn't sure. Has NX fronts for sure, though.
2014-01-04 19:33:24
#26
Originally Posted by LAM-PARK
Originally Posted by jet
lso, I actually have a stock oem Nissan (made by Alpine) 3 disc changer in-dash on my 98.


Pics ???


Originally Posted by FormerRSXSowner
Thanks Jet. Which Nissan HU are you using. Something like that sounds perfect!


Using stock single DIN unit for now. Got the car like this, unfortunately the charger is not hooked up to HU but wiring is all there. Still have not messed with under the dash stuff as of yet. Ignore the trim panel which was shaved off at where the disc changer is at, I guess previous owner had a HU setup that was retractable or removable.

2014-01-04 20:46:02
#27
Originally Posted by jet
Originally Posted by LAM-PARK
Originally Posted by jet
lso, I actually have a stock oem Nissan (made by Alpine) 3 disc changer in-dash on my 98.


Pics ???


Originally Posted by FormerRSXSowner
Thanks Jet. Which Nissan HU are you using. Something like that sounds perfect!


Using stock single DIN unit for now. Got the car like this, unfortunately the charger is not hooked up to HU but wiring is all there. Still have not messed with under the dash stuff as of yet. Ignore the trim panel which was shaved off at where the disc changer is at, I guess previous owner had a HU setup that was retractable or removable.



This is a thread with the pathfinder head unit. It's a double din, but I don't need anything to mount there currently. Pathfinder 6 Disc auxiliary port question

Do you know what Nissan that is out of?
2014-01-05 02:54:27
#28
Originally Posted by jet
Originally Posted by LAM-PARK
Originally Posted by jet
lso, I actually have a stock oem Nissan (made by Alpine) 3 disc changer in-dash on my 98.


Pics ???


Originally Posted by FormerRSXSowner
Thanks Jet. Which Nissan HU are you using. Something like that sounds perfect!


Using stock single DIN unit for now. Got the car like this, unfortunately the charger is not hooked up to HU but wiring is all there. Still have not messed with under the dash stuff as of yet. Ignore the trim panel which was shaved off at where the disc changer is at, I guess previous owner had a HU setup that was retractable or removable.




This 3-CD in dash changer Nissan LV715 appears to come from the A32 Maxima as far as I can tell so far. If you ever decide to pull it post a pic of the the Nissan part number that would be on the top or bottom of it. Then we can know for sure.

Thanks.
2014-01-05 06:17:03
#29
So it was swapped in? Makes more sense then
2014-01-17 04:33:48
#30
I hit up a couple junk yards this past weekend, but no useable headunits from the cars they had out. Did pick up some small items I was in need of (window regulator, rear seatbelt trim, window switch).

Finally got the car registered and emissions tested. Was able to drive it and it was nice. This weekend I am going to intall new brake pads, do oil and plug change, install junkyard pieces, and install g20 m/t ECU.

new plug wires, CAI, and tomei poncams are next on the list. I am going to do a dyno of car with everything minus cams, then install and dyno cams last. Was considering an exhaust, but the car has an OEM style exhaust with an ebay header and it's already loud enough for me.

I promise to get pics eventually!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top