Thread: b14/b15 front seats

I had a quick question. Are the mounts to the seats the same between the b14 and b15? I have an nx with b14 seats that are getting worn out and was thinking that if the mounts were the same I would pick up some b15 seats.

I don't think so. You would want to look for a B13 Sentra SE at the pick n pull. They have the SE-R seats and usually in ok conditon.

the b14 seats are already in my car. I was wondering if the rails are the same on for the b14 and b15.

like I said; I don't think so.

Someone may come on and correct me but from what I've seen.... cutting, welding etc is part of the deal for B15 seats.

If they're not, you may want to disassemble a b15 seat and see if the backs and cushions can be swapped over to the b14 hardware. Just a thought.

B15 are different. I have a set in My SE-L. (On some super ghetto modified brackets)

Someone was saying one of the 4 brackets does not line up.

Sweet fubar, that's the answer I was looking for.

Yes one doesn't it's one of the rears. U will need to drill a hole on your rear floor board, add a spacer so it won't sag, and bolt it up.. And add silicone on bottom of the drilled floor board so water won't go
In, and prevent rust from happening.

Easy enough, I was just trying to get a feel for what I was in for if I tried to pick up a pair of b15 seats to drop in. B14 seats were not much of a hassle, just some chopping of the original brackets and welding them to the b14 rails. Since I'm tall it had to be done, but otherwise they just bolt right in. Thanks for the info.