Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Who can tune an ecu for my b15 w/VE

+ Reply To Thread
Posts: 1-10 of 15
2011-05-10 20:41:06
#1
Who can tune an ecu for my b15 w/VE
Like it says im gonna swap a VE in my B15, who or where can i get my ecu tuned??
2011-05-10 20:54:09
#2
You can't. Convert to b14 or go standalone.
2011-05-10 20:58:46
#3
Or SAFC or E-manage
2011-05-11 01:49:41
#4
thanks for the info guys.
2011-05-11 17:12:54
#5
Like the other guy said b14 ecu . Contact zero99 on here and fubar102 . Zero99 makes the step down harness adaptor to go from b15 to b14. This is if you don't go with a standalone option . I did the ve swap in fubar102's 01 se and it was a bit of work . You'll also need a b14 maf or n60 as the se rr maf won't work with a b14 ecu . Also need a b14 distributor or a ve o ne . Mirrortints can also help you there as he did the same swap but used a emanage?
2011-05-13 13:01:50
#6
that is alot of work.
2011-05-13 18:27:05
#7
Just get a safc and install that and block off the egr and work through steps. Keep the SES light off and then swap.
2011-05-13 19:02:41
#8
Originally Posted by tsuruser
Like the other guy said b14 ecu . Contact zero99 on here and fubar102 . Zero99 makes the step down harness adaptor to go from b15 to b14. This is if you don't go with a standalone option . I did the ve swap in fubar102's 01 se and it was a bit of work . You'll also need a b14 maf or n60 as the se rr maf won't work with a b14 ecu . Also need a b14 distributor or a ve o ne . Mirrortints can also help you there as he did the same swap but used a emanage?


Did the stepdown harness work properly finally? Can I make this myself with the b14 ecu connector and the diagram from jgy's website? I know I want to rev to 9k after n1's and s&r's so I guess this is my best bet with a jwt ecu. How did u get the iacv wired properly since you guys never updated the other thread? Sorry for all the questions and thanks for the help.
2011-05-21 17:55:00
#9
I will be selling the b15 to b14 adapter eventually. It works with no issues

Sent from my VM670 using Tapatalk
2011-05-21 17:55:46
#10
My thread has been updated

Sent from my VM670 using Tapatalk
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top