Thread: tranny side mount problem

Hey I was wondering how would you guys repair the tranny side mount bolt hole. Mine has be striped and my bolt won't stay in how would ya take care of this. I try taping it and putting new heilco in it but still doesn't work. Help me out.

tap it and helicoil it the correct way

Anyone know the size thread the bolt is?

thread size is a m10x1.25

just go to the junk yard and replace the piece where u mount the motormount its not that hard

thanks b14vvl that what I'm looking for. And It not the mount or the bolt that I'm having problem it the thread that the bolts goes into inside the chassic. Doesn't the bolts goes through all the way and if I use heilco will it stay?

Put a slightly thinner thru bolt drill a hole in the fenderwell and put a washer and nut.mines been holding up for almost 5 years now.those thru bolts for the tranny are tricky.they get messed up easy.if you get a new one tighten the thru bolt first then bolt the tranny to it

Could look at getting a mount and bracket that doesn't bolt into the chassis.



-Phone-

Which car did that mount qnd bracket came off of? Will it be a boot on to the b13?

You mean drill it all the way through the other side of the fender?