Thread: filling up a stripped b15 trans.. :( help!?

I paid 1000 bucks for this thing from a forum member. my mechanic thats doing the work stripped out the fill plug/nut...

now my question is with the transmission installed on my b13ser with a sr20ve will the speedo sensor come in and out freely without hitting anything not letting it out. I could fill it threw the speedo hole? correct?
and these trans hold 3.0l right?

weld a extension into the fill plug & remove it, then get a new one

could i do that? what type of welder should be used?

im afraid a welder would melt the transmission where the fill plug is.

You can use the speedo sensor opening to fill it. 4 quarts.

so its 4 quarts? and not 3?
I was told 3 some where. lol.

im going to use the speedo sensor hole.

i think im going to put 75w90 in it.

can i get some feedback on that?

B13/14, P10, P11('99) 3.7-3.9 Liters per FSM. I don't see why the B15 tranny would be any different. But you should double-check.

i will man. ill call nissan and ask them LOL.

Ill be so excited to get this b15 trans in the car with a new act xt clutch. gotta break it in. 700 miles good? or longer??