Tsuru Lighting Install Completed!
So, after a good 6 hours because of corroded and hard-to-reach bolts, I was finally able to complete the Tsuru headlight install. Here it is.
I'm using a 2003 Tsuru grill without emblem for now. I have an extra one that I plan on modding with a dremel and some sort of cool screen material. But, at least for now, I have something there.
Here's a pic of the lights with the parking lights on:
Here, the lights are on:
From an angle with the parking lights only:
From an angle with all the lights on:
Here's the custom wiring I did:
See the shrinkwrap tubing? I used that to seal up the crimp-on connectors. One is done and te other is about to be slid over the connectors. One thing to be careful of is to make sure the corner lamp plug will still reach the bulb. My left side was almost too short. Had to do some finagling to get it on.
So, what do you think? Did I do okay?
Shout outs to Jon (Turbo91SER) and Sato (GSRMx) for helping me out with the Tsuru kit. I still owe you two un cerveza o seis!
I'm using a 2003 Tsuru grill without emblem for now. I have an extra one that I plan on modding with a dremel and some sort of cool screen material. But, at least for now, I have something there.
Here's a pic of the lights with the parking lights on:
Here, the lights are on:
From an angle with the parking lights only:
From an angle with all the lights on:
Here's the custom wiring I did:
See the shrinkwrap tubing? I used that to seal up the crimp-on connectors. One is done and te other is about to be slid over the connectors. One thing to be careful of is to make sure the corner lamp plug will still reach the bulb. My left side was almost too short. Had to do some finagling to get it on.
So, what do you think? Did I do okay?
Shout outs to Jon (Turbo91SER) and Sato (GSRMx) for helping me out with the Tsuru kit. I still owe you two un cerveza o seis!