Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: ga16 to avenier, can i use g20 p10 axles

+ Reply To Thread
Posts: 1-4 of 4
2008-04-02 16:18:12
#1
ga16 to avenier, can i use g20 p10 axles
i am having some trouble locating some lightly used se-r axles for my b13 avenier swap... wondering if p10 axles would work too? thanks
2008-04-02 16:22:10
#2
Basically the only things to watch for are if it's got a LSD or not, and I THINK if it's got ABS. I'd ask around about the ABS though....
2008-04-02 16:24:53
#3
yeah i need non abs manual axles, if i get lsd axles, i need the lsd tranny, correct?

i guess my question is are the axles the same length, same design, will work with a b13?
2008-04-22 15:30:15
#4
The outer CV joints are different between the B13/B14 and P10. Inner CVs are the same. A '94-'96 G20t LSD driver's side axle can be rebuilt into a LSD B13 axle with a new outer CV joint, but G20t axles are hard to find. They're usually rebuilt the other way around.

If you use an open diff tranny (RS5F32A) from a G20 or B14 SE-R/SE 2.0, you use '98-'99 axles from a B14 SE-R or SE 2.0.

If you use a VLSD tranny (RS5F32V) from a G20t or SE-R/NX2k, use '91-'97 SE-R/NX2k axles.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top