Thread: b13 center hole on hub

Not sure of the actual name. Whats the diameter of the center ring on the hubs. Have been searching and couldn't find it. I am trying to see if the rims I have will fit or not.

Matt

Should be 59.1mm iirc. Rotor location collar is 61mm and the wheel locator is smaller than that so yeh, should be right.

The hub bore is 59mm on the hub. The bore on a the wheel or hub-centric spacer to fit over it should be 59.1mm.

they don't fit i tried today, they're for honda hubs. any recommendations on drilling the hole larger DIY. or take to a shop.

I did a set of SER wheels to 65mm before with a dremel tool, but i seriously don't recommend doing that. Do it properly if you're going to do it at all, having done it the wrong way, i'd definintely do it the right way now.

thanks man, i found a shop to do it. so will have them drill it out this week.