Thread: ABS/non ABS question

Can you use a non-ABS knuckle on an ABS equipped car if you just dis-connect the ABS sensor?

My ABS is disabled anyway...

Yes.

ROCK ON

Thanks broham.

It fit without any issues! Truth is truth.

That control arm was a bitch to get off tho, I recommend using a breaker bar with a shallow 22mm socket and a 22mm box-end wrench. I had to remove the STB bar bushing bolts on that side to get the other joint out, FYI.

The other 17mm joint bolts had to be removed slowly so they didn't break off and had to use a lot of PB blaster.

Thanks again!