Thread: Momo hub adapters for B13

Who makes them?? Cant find any..

thanks

Use a s13 one.

ebay, just bought mine from ebay.

You sure they fit?? this is for a b13 se-r...

thanks

Yup.

Nissan Hubs - Hubs - Steering wheels - Products

Same part number for multiple applications.

im using a nrg s13 short hub with nrg quick relese i didnt like the momo one

What did any of you do to reduce or alleviate the grinding noise after the Momo hub is installed? I tried using Permatex dielectric grease thinking this may help but it didn't.

Or, if you don't have the grinding noise, what did you do that I didn't? I removed the stock steering wheel and attached the Momo hub & steering wheel. At first I tightened the nut too tight and the steering wheel wouldn't move, so I loosened the nut until the wheel freely moved. IDK, but even when it freely moved, and with the grinding noise, this just did not feel stable, so I've put the stock steering wheel back on. I'm not sure what I'm doing wrong since neither the steering wheel nor the Momo adapter came with any instructions (and trying to Google info on the B13 seems very slim. This thread is about the closest I could find regarding the Momo hub adapter).

Also, has anyone gotten their horn to work with the Momo adapter?

I have a 91 B13 (non SE-R, though).

Momo lists part # 3514 as fitting Sentra 91-03. This part did NOT fit on my B13. There is an outer hood that hits the signal and wiper combo switches and prevents the splined portion from fully mating with the steering shaft. Even if you cut the hood off, I don't think the center parts designed to reset the turn signals will fit.

Ordered part # 3508 for the S13 and it fit great. I know this thread was dead but I wanted to share my experience so people will listen to the above people that posted and not Momo.