Thread: UN-OFFICIAL - Front Lip Repository ( 91-94 )

Hello All,

While searching the forum over the last few months for posts on front lips and seeing pictures of front lips on
our B13 SE-R's I havent found a ton of info. Usually Ill see a lip on a car that looks good but without asking I
wont know what lip it is. I figured I would start this post to get a running collection of easily accessible lips
that are either:

1. Made for our cars
2. Are easily adapted to our cars.
   

I would like to keep this post clean and consistent so future users can find the info they are looking for easily.
In posts if we could stick to this format I think this could turn into a good repository for this topic.

Bumper Style -
ie 91-92 OEM, 93-94 OEM etc,

Front or Rear -
ie Where the lip goes

What car lip comes from - stock or what car it is made for.
ie - 88-92 Mazda 626

Whats required if modified to fit.
ie - trim middle 2 inches ( possibly post a picture )

A picture of the lip in final form on the car.

I will start the thread with a few that I know of already. Try and keep all posts as basic as possible and try to
follow the below format, You can cut and paste into your thread.



There are many other lips I have read about but have not found enough information.
If anyone can share the info and or pics that would be great to have in this thread.

Some Examples :

VW MK II 90-92 Golf / Jetta Big Bumper Lip
VW MK III 93-99 GTI / Jetta OEM Lip
S13 Lip
Accord Front & Rear Lip

Lets see what we can put together, Alot of this information is out there just not in one easy to navigate location.

Bumper Style: ( 91-94 ) All
Front or Rear: FRONT
Year / Model Lip comes from: 88-92 Mazda 626
What needs to be modified: Lip is 2 piece and can be shortened in the middle. To secure you can use self tapping screws, double sided tape or a nuts and bolts

On 93-94





On 91-92

Bumper Style: ( 91-94 )
Front or Rear: FRONT
Year / Model Lip comes from: Stillen
What needs to be modified:

91-92 : Lip slips right over stock bumper.

93-94 : You need to cut the lower half off from the bumper then it can be
mounted with double side tape and secured with screws on the ends.

Thanks will edit, Can you just remove the pic from your QUOTE to keep the thread clean. Thanks!

93-94 is confirmed, I have this lip on my 93.

Thanks Loki! Mods can we clean the thread up and remove post 4 5 6 thanks!

On the 91-92 the Stillen piece fits right over the un-cut bumper.

All custom lips(b13 sentra) POST HERE - Page 5 - SR20 Forum

mess of a thread but useful info

Bumper Style: ( 91-94 )
Front or Rear: FRONT
Year / Model Lip comes from: Xenon (formerly known as the Nismo airdam)
What needs to be modified:

91-92 : Lip slips right over stock bumper.

93-94 : You may need to cut the lower half off from the bumper then it can be
mounted similar to the Stillen lip.

http://www.se-r.net/body_trim/nismo_airdam.html