Thread: What Did You Do To Your B13 Today?

sucks

Your day goes about as good as mine. my det spun a bearing but my block is still good. that sucks man

i'm fixing a spun bearing on my det as well...

Went to change my headlight bulbs to Phillips Xtreme bulbs and drill a couple holes in my license plate so I could install it correctly. Already had the correct stainless screws and some rubber washers.

Figured out the battery and the overflow tank had to be moved to access the lamps. Could not get to the bolts to get the aftermarket overflow tank out of the way without removing the windshield washer bottle. No, I did not realize the neck actually removed. That would be too easy. So I unbolted the tank from the wheel well. Which was not good, because now the tank was stuck under the car with no way to get it out. So I removed a bolt at the corner of the bumper at the wheelwell to see if I could get a little more room to wiggle-out that tank. No go. Figured I'd jack up the car, no jack in the trunk. In my 900 square foot shed. Somewhere. Grabbed two hunks of two-by-tens. Positioned them under the wheels and drove up onto them. Now the overflow tank was jammed between the lower control arm and the dirt. Yanked it out. Followed and removed all the hoses. I cannot remember ever using the windshield washers in the entire 17-years I have owned the vehicle. Weight reduction.

The sun was about gone. I still had not removed the battery, the overflow tank, or changed the lamps.

So I took the car for a...ahem...quick romp around some very twisty, hilly, damn-near-deserted back-road two-lane highways.

Tomorrow I've gotta change my headlight bulbs and fix my license plate.

lol, Shawn too funny. How else did you think the washer bottle would have been removed. That neck wouldnt fit through that hole in the car if you tried. haha. Good stuff. Im sure you miss having your mechanic around.

Good to get your hands on though. Its good for ya.

Filled in some deep scratches on my GT-S bumpers. Such a headache.

Rewired My Foglights So That They Work With The Parking Lights & Not With The Headlights . I Also Put A Set Of Hood Pins On .

made a support bracket for the hood latch assembly. Reinstalled the hood and drove it to get some gas.

Haha Shawn,thats alright.
You wont have squirters on the CF hood anyway,so fuckit.It looks cleaner that way,too.

I removed love bugs yesterday for hopefully the last time for a while...hate those fuckers

What's with the two large holes in the front bumper??