Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: What Did You Do To Your B13 Today?

+ Reply To Thread
Posts: 161-170 of 4,520
2011-01-01 00:41:06
#161
Put a new headlight enclosure from the junkyard in on the driver's side along with a PIAA bulb. A rock put a hole in the glass in the previous one and the rain shattered my bulb. Having two headlights is nice!
2011-01-01 06:41:40
#162
Finally put the 5th wheel spare in it's place!

2011-01-01 08:43:36
#163
I hit a rock on the way home from my friends house at 3 in the morning made the car hop alil thank god for the center brace
2011-01-01 17:48:43
#164
Well, I didn't do it to my Classic, I did it for my Classic. Yesterday.

I went down to the RR-crossing on the road in/out of our farm. It was poorly graded by the RR company, and left with a small hump in the middle, on the highway side of the tracks. (RR runs parallel to the highway). My Classic, on Hypercos, would not clear that son-of-a-bitch without scraping. Had to eeeeeeaaaaase it over the tracks...and....."skrrrrrnnnnnch"...once the front wheels dropped over that high middle part of asphalt and down the highway-side slope. Ouch. Fuck that.

Bought a 2-inch wide cold chisel with rubber hand-grip and guard. Grabbed a large hammer (couldn't find my little sledge, dammit), gloves, gel knee pads, and some safety glasses.

Looked at all the scrape marks, most of which were not from my Classic but other vehicles that could not clear either. Backed up and eye-balled the crossing from different angles.

Chiseled on that shit until I had planed-off about 1/2-inch off the high-part where the scrapes were. Maybe a square foot or two of actual "scrape-area" to be removed. Brutal-hard work. Sweatin' like a pig. Fingers tingling, shoulder on fire, arms and face covered with asphalt dust and flying debris.

Took the Classic out last night....eeeeeaaaased it over the RR tracks...and..... "skrnch" . Just a tiny, little scrape. Barely a scrape at all.

Gonna give my shoulder a break today, and go do a little more massaging on that damn crossing later this week.
2011-01-01 18:45:33
#165
^^ Awesome.
2011-01-01 19:25:06
#166
You'd be arrested if you try stuff like that here XD. Awesome!
2011-01-01 21:56:25
#167
Nothing in the last few days. Hopefully working on the bay tonight if I'm not spectating some races.
2011-01-01 23:14:37
#168
1-1-2011

Installed My HP Racing Headers

2011-01-02 22:03:17
#169
1-2-2011

Stripped My Old Motor
Removed Everything
Block Is Bare With Holes On The Sides From A Rod

Starter Still Not Engaging So I Tryed To Crank By Hand , Seems That Something Is Inside The Block & Stoppping It From Turning Fully

So I Jacked Up The Car
Drained The Oil

Will Continue Tomorrow When All Oil Is Out
Then Im Going To Remove The 2 Oil Pans
2011-01-03 16:33:02
#170
1-3-2011

Removed Both Oil Pans
Checked For Any Loose Parts Or Broken Parts
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top