Thread: 1994 Sentra LE rear seat

I've seen reviews of them that state that they had a fold-down rear seat and I'm trying to verify that. Has anyone seen/owned one? Anyone know of one in a junk yard? I want to use the plastic shrouding for the B14 rear seat conversion that I just did.

Yup, my rear seats fold down
Need pics??

Yes, please. One from inside the trunk towards the front and one from the inside, flipped down too. You rock.

Here you go:

[url]http://[/url]

[url]http://[/url]

[url]http://[/url]

[url]http://[/url]

[url]http://[/url]

[url]http://[/url]

Sorry about my rear seats, there in bad shape

MANY THANKS!

Also, don't apologize! Thats a rare set-up you've got there. I've seen dozens of B13s in junk yards and am yet to come across one of these! They look comfortable at least!

Could I get a close-up of the center hinge and a shot of what the locks look like on the plastic?

I'm also wondering how the colors came out, number-wise. IIRC, I did see an LE a few years back with a gray interior and it had the flip-down seat. Yours is one of the first beige interior B13s I have seen and Blue seems to be pretty rare too. Almost all the B13s I have seen have a gray interior, except for the SE-Rs that all have the black/dark gray scheme.

Lol, I didn't know B13 folding seats were rare, I thought every B13 had them....
Pics coming up

Ok idk if this was the center hinge you were talking about, please correct me if it's not...and I don't know the color of the seats, number-wise...sorry man





The Lock:






And here is where you pull to unlock it:


And finally, here is where the lock connects to:


Please if you need anything else, feel free to say
No worries, I have alot of time in my hands

I used to have a 91 gxe 4dr with that same set up

Gotcha, LE and GXE have them. I dont know if any other years have them, but I'll keep an eye out and post.

Thanks for the additional pics. I want to see how that very center hinge is mounted, but you'd have to take out the seat to see the mounting. I didn't cut anything off my car though so I'll be okay to mount up just about anything, guessing its a plate like the one I cut out of the B14 I pulled my hinge from.Tomorrow I'm going to cut up the B14 plastic that I have just to get something over the side hinges and secure them some more, the plastic acts as a spacer between the hinge and the wheel-well.

I'll make a write-up about it and add it to the thread about the conversion if I can find one, hopefully in gray or blue, that tan would be kinda nasty on the color scheme of an SE-R

Ok, I will take pics tomorrow of the center hinge
I know which one your talking about...and I agree on the tan color scheme, I don't like it