Thread: My 94 B13 project cont'd....

Old engine is out, expecting the delivery of my new SR20DE Roller Rocker some time today


New Clutch Kit


Installed Brand New Tie Rod Links on both sides...


Cleaning up the wheel wells and installng new ball joints...


Will keep this thread going as I progress....

Best of luck brining her back to life!
Those new Tie Rod Ends look sexey new!

OK so it's Feb 25th and here is where I stand right now. The actual install will take place Saturday...input is appreciated.

looks good....are you using the original tranny?

Yes that's the original tranny, just cleaned and painted, it's in very good shape.

Very nice man. I have bnib oem tie rods I have to put in. No clue how to do them though so gotta start search. I also have to do damn ball joints. Keep up the good work man.

Tie rods are quite easy, just be sure and count the number of threads left on the link before you remove them, this way you can avoid needing an alignment later. The ball joints were tough to press in there, I used a 3 leg steering wheel puller. If you need any help on the process let me know.

I will have to try it out. Wouldn't be bad learning something new.

I would do it now but this damn snow storm is killin us. Hopefully it will be gone soon enough. Tired of winter.

When you get that far and are ready to do it, you can call me and I will walk you trhough it if you want, it's not very time consuming at all

OK, engine is in, now it's just hooking up the electrical connections and cleaning the engine bay up real nice. I had an adjustable sling so it made installation super easy. Whole process took about 20 mins. Whatta ya think fellas?