
i swapped in my built DET last year in june. with it was a new 2.0 b13 clutch cable. im running the JWT extreme pp and disk. it is a like oem feel...ever so slightly harder to push, but barely could feel the difference. now around 6,000 miles on the motor and cable, it has been getting progressively more difficult to push. like its getting tighter. it feels like its binding up, like it will snap at any moment. it gets tougher and tougher as the weeks go by. i had a friend push will i popped the hood and looked and listened. you can hear it where it comes through the firewall. i tried spraying some PB blast in that location and on the arm on the tranny...no effect. i literally have to stand on it to start the car. i chirp tires and stall often as a result of this problem. i know its doing a number on my clutch too! any ideas other than the obvious...change the cable?