Thread: NEED a B14 modified basemap, will send $$ through paypal!!

I can not get to the dyno for another month or so, just looking for a safe basemap from someone who has experience with tuning and isnt guestimating!!

The car:

99 infiniti G20T

95-96 B14 ecu with calum basic daughter board

Stock .bin for ecu and runs smooth (B14_SR20DE_1M861_MT.bin)

brian crower stage 2 cams w\ stock gears

basic WAI

OEM clutch with 13lb flywheel

unorthadox pulley

stillen headers

2.5" mandrel catback with hollow cat and vibrant muffler

195/45/15 tires which brings down the gearing ratio considerably



I would be flashing this to a chip with flash and burn using stock bin and buffer adresses. Please PM me with a price and a time and we will go from there!!

Is this vehicle on stock maf? I assume so.

Yes it is the stock G20 MAF, and when the B14 ecu was first installed I got a fuel trim code a couple times, is the ECU looking for B14 MAF going to be an issue? I assume the .bin can be modified for the right voltage parameters? New to tuning in general, so I am just trying to chase down my lack of power issue. The BC2 cams made the car much slower. So I am hoping it is related to tune and ECU/MAF differences