Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: UPDATED n/a sr20de bin for n60 maf

+ Reply To Thread
Posts: 31-40 of 67
2011-07-30 20:59:38
#31
the a/f still close to the same as other prev ver. Its about 15:1 cruisin and 12.5:1 WOT.
2011-07-31 02:39:53
#32
So what all changes with the V4? Just a lil more fine tuning on the AFR?
2011-08-01 14:01:48
#33
yes more fine tunning of the a/f and a bit more timing
2011-08-08 04:20:19
#34
I know mike kojima was sceptical of upgrading the MAF, just wondering what your reasons were? (I think i can find one at the pick a part pretty cheap). Would this tune converted back to stock MAF be better than calums old de v4 tune for a bolt on de? thanks
2011-08-11 10:30:16
#35
does any one know how 2 change a stock maf of a sr and wire in 2 a n60 maf
2011-08-21 23:31:35
#36
well you need a schematic of both mafs so you can match the wires up. search and you will find. miko has a post on what color wires are what.

Here is the latest version guys.. a few changes and more timing at WOT
Last edited by Haulin200sx on 2011-08-27 at 13-49-13.
2011-10-21 22:53:15
#37
Thanks for the bins man. You did a wonderful job. I was finally able to get your bin loaded today. Been looking for someone to do it forever now. I used V6, and my car runs so much smoother. I can feel more torque down low. I used to have the hardest time getting to a roll from stop without stalling (damn light flywheel, lol) now it hardly needs throttle to take off. I gave it what I used to a few times while getting used to it, and it chirped the tires easy. The wavering in the power band I used to feel is gone now as well. Overall it runs much better, and the idle went up from 750 to 970ish as well.
2011-11-29 09:32:56
#38
hi man, i'm sorry for such noob about tuning.. but anyway.. currently i do have all stock internals.. though I already do have IHE..

what you think is best bin for me? just to have it more higher timing and more fuel delivery on high rpm.. then have it cut 7.5k rpm.

thou planning to upgrade bigger maf.. can i use GTI-R maf?
2011-11-30 03:05:47
#39
using v6 with great successes setup- b13 maf (modified bin) 10:1 with bc2 cams
thank you for making this public.
2012-03-03 21:25:52
#40
Thanks everyone!

This must be close to the best free na de bin around. Of course you guys should be monitoring a/f's to make sure thier in check and use premium fuel since timing up top is quite high. This does kill Calums base de na bin, so USE AT YOUR OWN RISK!

Also this bin is easily modified if you only got a de maf.

Anyone got any issues or idea's for this bin?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top