Thread: BIN request UKDM SR20DE+T 10:1/N62 MAF/370 cc injectors/3bar/GTI-R T28

Hello everyone! I will be grateful if You can suggest a safe bin for my setup. This is my first turbo setup and i want to be sure (until the wideband comes) that there will be no problem to start and test the car(not power optimized at the beginning, just a safe way to test if everything is running okay).
As in the title UK 10:1 with GTIR T28 turbo, N62 maf, 370 injectors on 3 bar pressure. Thank You in advance!

Any reason you aren't going 4 bar?

Excited to hear how the setup runs. I have a 10:1 and would love to turbo it with a similar setup. Post up when you get it on the road!

There is no particular reason, just want to build it this way and after get used to the turbo car (first one) and feel the thirst for more boost I'll just swap bigger injectors, besides i am not including AFPR in the setup and keep it stock pressure (Wallbro 255). Everything is "on the table", but it is kinda cold out here and I am just waiting a couple of good days to start the build. Actually I have some bin files, but they are for a 9.5:1. So if i cant find the exact bin for me I'll just drop a few degrees of timing over the table and tune it a little more rich and will run it again so...

Anyone?

You dont need BIN exactly for UKDM DE. Every 10:1 is just fine, or as you mentioned, use 9.5:1 and retard timing a bit. But still, every setup is different, every engine react different and you would need to fine tuning that BIN anyway in future.