Thread: Need Bin : p10 - de+t - t25 - 370cc 3bar - N60 MAF

If anyone has the bin let me know.

Thanks in advance!

I have 4 bar ones but for 370 INJ/ DE maf and Z32 maf Ivan.

I have a VE 333cc DE MAF 3 bar.

^^^ VE has different timing way more timing than DE i think so it might be bad... and he needs N60 maf I think he wired it up...

Hit me up Ivan if you want to test a bin lol........

^^well I just figure since you posted a useless bin for him, I would too!

^^^ How is mine a Useless bin its for a DET set-up and mine are for DE maf or Z32 maf.

He ain't going to max out the stock maf with a T25 duhhhhhh you should use your brain if thers any!!!!!!!

I ain't a dump one giving him a bin to blow his engine

Hey Ivan you never Txed me your email adress I do have the N60 bin from my old motor set-up

I have:

SR20DET/ 370's/ DE MAF
SR20DET/ 370's/ 4 bar/ Z32 maf
SR20DE/ 370's/ N60

Hit me up with your email or come down to stockton you get the chips burn for 10 bucks at a local shop.

DO they give u burned chips for 10 or do you have to buy the chips seperatly? Email is [email]magnavox2008@hotmail.com[/email] give me the sr20de+t with 370's 3 bar and n60 maf

You bring your chips he burns them

Unless he has chips he sells the to you 10 bucks chipped too

I have that bin for a B13 ecu, LMK to upload.

Here is two bin´s
The US_DET_N60.BIN is a normal bin no edited

The LC_US_DET_N60.BIN is edited with Launch control to 5000 rpm´s and fan settings, start to 95° and off to 90°

Recomend edit TP scales maybe is to hi to you setup.

To my B13 work fine but I don´t know to you.

MEGAUPLOAD - The leading online storage and file delivery service

Regards.