Thread: Alfred.bin Needed - for N60 maf.

done!

Wow, that was super quick.

Thanks.

be sure to keep an eye on the afr's guys.

ok so a few things i've noticed on this bin is when the engine isn't all the way warm it feels really goofy down low rpms, not sure how to explain it.. its like guttless then stumbles then is normal.. something that didnt happen on the last bin even after the cam change back.

for the record is just the alfredlesstiming with proper n60 maf an let nistune do all the math

i have a wideband so my afr's look good.

i haven't tried the lesstiming one yet so idk about that. but i know before on the less timing bin my car allways stumbled when it wasn't fully warm. like it was hitting a brick wall. but i would just let it warm up and be on my way.....

i wonder if nistune negates some of the changes i've figured out when you upload hence why it isn't ezactly the same?

i think im going to roll back to my previous tune and adjust the afr's accordingly.. atleast with that tune it was smooth cold or warm

check the cold start ignition timing in the bin. Compare it to the bin that didn't give that trouble and see if they match.

it should be the same being the tune was the same. the only real changes were the vq map and k-value.

The tune I was using with n1s was a tune I made from a stock de tune

i'm talking bout the two lesstiming bins.