Thread: BIN Request! B13, U13 ECU, T28, N60 MAF, 370s, 3/4 bar, stock internal USDM

I'll just try to grab an N60 then, and since that's the case. Do you have a bin that will meet those specs?

I have the info for the N60 maf for b13 ecu. I dont have any bins for the u13 ecu though. I dont know anyone who runs it. I also have a ve-t bin for a ve ecu and a b14 bin dont recall the setup.

Anyone know if there is any substantial differences between u13 and b13?

Yes, very good questions. Anyone know if there is any substantial difference between the U13 and B13 ECU? I imagine they are due to one being turbo'd... but how much?

Well not so much the turbo difference. I mean in the programming of the ecu. Is it 32bit or 64 like the ve/b14, etc. Also is the xdf file the same, ecu values and all that the same. If so you wont need to find a U13 bin. You can get a b13 bin which would make the whole process a million times easier.

I now have my hopes up. somebody please chime in soon, my goal for this weekend is soon approaching.

i have tunes for the 9:5 so i could prob use that timing and fuel and you would be alright. these are just base tunes not dyno proven or anything

O.o' That would probably work out alright. Do you have a burner? if so, is it possible to dump BINs that are currently on the chips and modify them? If so, I could send you my chips, and then try to put in your timing/fuel maps for the 9.5:1. Let me know if that will work.

Anybody have any input on the whole U13/B13 maps being significantly different from each other?

Updated first post. Just bought an N60 and need a bin for it now. Not in any hurry yet as I don't have it yet, but I'll be checking.

bump. Have the N60 now, would love a nice tune for it

Shouldnt this be in the tuning section?