Thread: b14 ecu

hey ill be sending my ecu to you by the end of the month but have a few question. Ill be running 96lb msd injectors. I dont want to run resistors so could you put a board like this in http://jbperf.com/p&h_board/index.html
I am puting in a gtir motor, so should i use that ecu? I really dont want to go through the trouble of changing my wiring harness. Thanks

I would just use dropping resistors, your stock ECU, and stock harness. Are you going to use the lightning maf?

no, im going to use a z32. I dont believe you cant have to big of an injector, but i might be wrong

The problem with large injectors is you have to have really small injection times at idle. This makes them much more finikey to tune than a smaller injector.

If your using a Z32 maf your better of with the MSD 72lbers, they match the HP limits of the Z32. For the 96 you need to run a lightning maf. But if your not in the 500whp range this is overkill.

What size turbo?