Thread: strange new problem with realtime

the ecu that i have been using for over a year now all the sudden stopped working. for some reason it sends no power. car cranks fine everything is just fine, starts and evrything is perfectly good with a diff ecu. but for some reason i get no power at all with this ecu. i have tried reflashing it, no luck...

is this a problem anyone else has encountered? something that can be fixed, or something calum can look at?

any ideas? thanx

If its a B13 RT, you might try re-seating the board.

im not exactly sure what you mean. but yea its the b13rt. i did take a look inside and pull the upper board off to try and see if anything was obviously wrong, but didnt see anything.

Pulling the board off and plugging it back in is re-seating it.

hmm ill give that a try.

bump. think calum can take a look at this

I had the same problem with my b14 realtime. Sent it off to Calum in late January, early February and haven't heard anything back from him about it. Can't reach him through email or on either forum unfortunately. Luckily I still have my basic that I have been using.

yea im in the same boat. im using a basic right now to get by, but once i get my new build done ill need the realtime working again... please let me know what you hear back from him...

Anyword from anyone on this? Love how this section is called realtime support.

Why don't you just e-mail him. His e-mail address is on the order form... He's going on vacation on the 19th and won't be back until the new year, so chances are he may or may not answer until then.