Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Price Quote on some Magnaflow's!!

+ Reply To Thread
Posts: 31-40 of 53
2009-01-05 20:50:34
#31
2.5
2009-01-08 02:15:04
#32
Originally Posted by blairellis
Need a price quote on the following shipped to Ada, MI 49301:

5" Magnaflow Resonator 12867 (x2) + 3" Magnaflow Muffler 11229.

Send me a PM will ya? I might forget to come back and check on this thread.


Crap, I deleted your PM on accident. I need to see if you can send me it again. My muffler just developed a hole in it, and was thinking of finalizing a 3" exhaust and just running that with those two 5" resonators until I boost the car. Looking forward to hearing from you.
2009-01-18 03:57:54
#33
MagnaFlow 12646

Price shipped to 30707. The other resonator was to long to fit with a cat and they wouldn't install it without it
2009-01-23 16:07:09
#34
Magnaflow 12646

^Rob can you find me this same resonator but the only difference being a 3"inlet/outlet.
2009-02-06 05:38:25
#35
I need a price quote on a few magnaflow items...

14815
14816
12251
10435
2009-02-06 16:08:42
#36
Inlet Diameter (in): 3.00 in.
Inlet Quantity: Single
Inlet Location: Center
Outlet Diameter (in): 3.00 in.
Outlet Quantity: Single
Outlet Location: Center
Internal Construction: Perforated stainless tube with packing
Muffler Material: Stainless steel
Muffler Finish: Natural
Case Length (in): 18.000 in.
Case Outside Diameter (in): 6.000 in. or 5.000 in <---maybe
Overall Length (in): 24.000 in.

^If anybody know where I can get a resonator with these dims, let me know.
2009-02-06 16:15:19
#37
Here's the 6" round one: MagnaFlow Performance Exhaust (Part# 12649)

Use the part number to find it on Summit's site or get from Rob.

There's no 5" version like that from magnaflow (we all wish there were).
The best you can get is this: MagnaFlow Performance Exhaust

Which isn't as long as the one you wanted.
These are stainless steel by the way, they have the same in regular steel.

I'll see what I can find from other vendors.

Edit: I remember looking for the same stuff a while back and not finding much at all. All the stuff is 4" diameter.
2009-02-06 16:29:59
#38
4" ROUND is to loud for me on a N/A car. Thanks for the link bro! Hey Rob, get me a price shipped for this one.

Magnaflow Part # 12649

I've had convo's back and forward with Rob, and he didn't find this. I never had a part # so that made the google search a little difficult. Nothing came up if I typed in the size I wanted.

http://store.summitracing.com/partdetail.asp?part=mpe-12649

^Here it is from summit, the price is waaaaaaaay better than the link you gave me. Nearly 50% difference.

I wonder how the 5" round would work with that being the only difference between the resonators?
2009-02-06 16:49:47
#39
Originally Posted by MR-4Door-SR20DE
^Here it is from summit, the price is waaaaaaaay better than the link you gave me. Nearly 50% difference.
Yep, that's the way it always is. From what I've seen, Rob sells them slightly cheaper even.
(I always use Magnaflow's website to find what I want because it is very easy to navigate and find what you want. Then I take the part number and look it up on summit to buy, or talk to Rob).

Originally Posted by MR-4Door-SR20DE
I wonder how the 5" round would work with that being the only difference between the resonators?
No, the 5" round one is also 4 inches shorter. So it's not a direct comparison. It is a very hard choice, one I couldn't make so I decided to go with 3 of the 4" diameter resonators totaling to some 40" length of resonator. :o
2009-02-06 17:01:47
#40
Originally Posted by BenFenner
Yep, that's the way it always is. From what I've seen, Rob sells them slightly cheaper even.
(I always use Magnaflow's website to find what I want because it is very easy to navigate and find what you want. Then I take the part number and look it up on summit to buy, or talk to Rob).

No, the 5" round one is also 4 inches shorter. So it's not a direct comparison. It is a very hard choice, one I couldn't make so I decided to go with 3 of the 4" diameter resonators totaling to some 40" length of resonator. :o


^I know that, I was just saying if there was a 5" round, how would it do with that being the only diference as far as sound control goes.

What you think about having the #12649 on a turbo car with a catalytic converter? You think it would rob to many HP's?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top