Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Unorthodox Racing Underdrive 2 pulley set

+ Reply To Thread
Posts: 1-10 of 28
2009-02-18 00:21:33
#1
Unorthodox Racing Underdrive 2 pulley set
K so I installed these the other day. The 2 pulley set of the crank and water pump. Took about 30 minutes to put them on since I had all the stuff I knew I would need to make it go quickly and no AC/PS.

My impressions of the pulleys are that I love them. You wont really feel a power boost since its through out the whole RPM range. But My revs go up a it quicker now and my throttle response is right where I want it to be. I rev match my car on every downshift also and with Just the 10.5lbs flywheel on my DET it would take a good stab to the gas to match the revs. Now it revs easily with a little gas. I love these pulleys!
2009-02-18 00:48:59
#2
Agreed I loved the quicker reving of the motor with these. The best part is with A/C on, it doesn't feel like you loose 20whp!



2009-02-18 02:45:20
#3
The blue looks better
2009-02-18 03:08:56
#4
OK guys here's a question. I have a 2 pc set in chrome color. I did in fact get them after much ado.

Which one do I put them on? My SE-R is boosted and maybe needs some hp (and a tune) but my NX is due for some bolt-ons and that could be more needed hp for a stock dd w/223k. I'm afraid of getting wasted by my homie w/W10/s4s though. Grudge racing and all @PIR.
2009-02-18 04:26:01
#5
Originally Posted by Johnny
The blue looks better


Stealthy

Originally Posted by Benito
OK guys here's a question. I have a 2 pc set in chrome color. I did in fact get them after much ado.

Which one do I put them on? My SE-R is boosted and maybe needs some hp (and a tune) but my NX is due for some bolt-ons and that could be more needed hp for a stock dd w/223k. I'm afraid of getting wasted by my homie w/W10/s4s though. Grudge racing and all @PIR.


I would stick them your DD, you will benefit from faster reving and better gas mileage form them more. Put the problem is, if they do throw off the harmonics of the crank that might finish off the 223k DD...
2009-03-23 06:38:48
#6
I always have problems finding the correct belt with the right amount of ribs
2009-04-17 12:23:58
#7
Originally Posted by squabzter
I always have problems finding the correct belt with the right amount of ribs


goodyear... if you need part numbers let me know
2009-04-17 13:59:31
#8
UR underdrive crank pulley + no power steering system + no mechanical water pump + a 8.5 flywheel = Auto X Fun
2009-05-03 18:48:30
#9
I've got the 3-peice Unorthodox Racing pullies. My crank pulley seperated, became two peices (LOL) and was toast. The idea and expense of a new Nissan OEM crank pulley did not sit well with me.

Every breakdown is an opportunity to upgrade.

I love them.

Zero issues, a noticable amount of additional pep from the engine bay.

Underdriving the water pump also resolves a reliability issue due to water cavitation at extended high rpms.

__________________________________________


BTW with a 3-piece pulley set, AC works a bit better. That is actually a fact.

AC, Fuel Injector, General....questions... - SR20 Forum

Which, in a hot climate zone is reason enough to get the 3-peice set.
2009-11-11 06:30:34
#10
Wasn't their a issue with these pullies with the oil seal leaking awhile back? I noticed Gspec sells a pulley spacer would I need to add this to these ?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top