Thread: VE Center Feed Plenum

Similar to our bolt on plenum but with a center feed throttle body. These are set up to use a Cobra dual 62mm throttle body that is found on tons of the late 90's Ford v8's. They can be had for as little as $55 used and you can upgrade to a HUGE single plate oval if desired. The TPS can be wired in easily as well and can be found on any Ford throttle body.

These will be offered in a polished finish as well. Pictured is mill quality (before polish).







Throttle body exits underneath the plenum. Bending silicone reducers and T bolts are available for ease of installation.

Also includes:

Mounting hardware
Free runner modification
Vacuum fittings
Throttle cable bracket
Lifetime warranty

$600 non-polished
$700 polished
$55 add for silicone coupler/T bolts
$175 add for rebuilt Cobra throttle body
$80 add for new TPS
$40 add for pigtail

Polished version...

Neat-o

Sent from my SAMSUNG-SGH-I317 using Tapatalk

I saw this at the Convention. It is a pretty mean piece. Torque curve was flat and straight across the whole range. I consider this piece a success.

@vqman

Dyno at Ohio convention with @SR20GTi-R at the helm.



N1 cams, springs and retainers, ASP header, 3" exhaust, Performance Plus intake.