Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: VE Center Feed Plenum

+ Reply To Thread
Posts: 1-6 of 6
2014-03-15 03:14:05
VE Center Feed Plenum
Similar to our bolt on plenum but with a center feed throttle body. These are set up to use a Cobra dual 62mm throttle body that is found on tons of the late 90's Ford v8's. They can be had for as little as $55 used and you can upgrade to a HUGE single plate oval if desired. The TPS can be wired in easily as well and can be found on any Ford throttle body.

These will be offered in a polished finish as well. Pictured is mill quality (before polish).

Throttle body exits underneath the plenum. Bending silicone reducers and T bolts are available for ease of installation.

Also includes:

Mounting hardware
Free runner modification
Vacuum fittings
Throttle cable bracket
Lifetime warranty

$600 non-polished
$700 polished
$55 add for silicone coupler/T bolts
$175 add for rebuilt Cobra throttle body
$80 add for new TPS
$40 add for pigtail
Last edited by nsusammyeb on 2014-05-15 at 01-35-07.
2014-03-21 23:48:33
Polished version...

2014-03-22 03:22:37

Sent from my SAMSUNG-SGH-I317 using Tapatalk
2014-06-23 02:38:54
I saw this at the Convention. It is a pretty mean piece. Torque curve was flat and straight across the whole range. I consider this piece a success.
2014-06-28 20:36:59

Dyno at Ohio convention with @SR20GTi-R at the helm.

N1 cams, springs and retainers, ASP header, 3" exhaust, Performance Plus intake.
2014-06-29 02:44:19
Last edited by Kyle on 2014-06-29 at 03-26-29.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top