Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: rear alignment link--PROTO DONE Page 3

+ Reply To Thread
Posts: 11-20 of 60
2010-09-25 21:39:17
#11
isnt this piece made for the b15s already?
2010-09-25 21:55:19
#12
Originally Posted by kaotekxe
isnt this piece made for the b15s already?



only 2 were ever made, I'm not telling Rich lololololol hahahahah...I'll fill you on later through text
2010-09-26 08:00:33
#13
I would take one
2010-09-26 17:50:57
#14
Originally Posted by kaotekxe
isnt this piece made for the b15s already?


only 2 were ever made
2010-09-27 02:20:37
#15
I can make them. CA should be done this week so this would be a nice change.
2010-09-27 23:05:03
#16
Originally Posted by Overkill
I can make them. CA should be done this week so this would be a nice change.


if you need me to send a stock JR link i can...text or call me 774-319-9072
justin
2010-09-28 10:08:05
#17
I'd like to see the numbers on how much "dog tracking" as you call it happens in the real world.

I think that eliminating deflection in the trailing arm bushings for starters and in the link bushings in general would be more beneficial than just replacing that little link. Does the shorter link put more stress on the factory bushing that connects to the other part of the rear beam?
2010-09-28 11:01:50
#18
b15 has smaller id for one of the bolts otherwise they are similar.
2010-09-28 23:14:30
#19
Originally Posted by Cozzm0_AU
I'd like to see the numbers on how much "dog tracking" as you call it happens in the real world.

I think that eliminating deflection in the trailing arm bushings for starters and in the link bushings in general would be more beneficial than just replacing that little link. Does the shorter link put more stress on the factory bushing that connects to the other part of the rear beam?


it's not smaller, the size in length is adjustable...note the threaded part, this way it can be shortened or lengthened.it's minimal the amount it will adjust. but if you want to notice the difference...throw your b14 into a turn hard left then right. then come repost
2010-09-28 23:33:37
#20
ohh yeah, did you read my first post
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top