Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Happy Plates :)

+ Reply To Thread
Posts: 41-50 of 72
2010-08-03 19:44:29
#41
ok, why not plasma cut it out?> to tight of tolerance's?

the OEM you did in the 1sst page, looks alot tighter than this one...


or are these being cut by hand with a plasma cutter?
2010-08-03 20:54:59
#42
We only have a CNC plasma. IN order for it to look correct it has to be stencil font. We can do it in stencil
2010-09-04 23:40:41
#43
If you can do it on the rear beam of the b14 I will be down.
2010-09-08 15:53:18
#44
For the B14 guys, would you like it to attach to the rear bumper or to the rear frame rail? If you want the frame rail location it will need to be drilled into with two small 8-32 screws, which will be provided.

Mark
2010-09-08 16:13:48
#45
Frame rail. It'd look dumb on the bumper IMO.
2010-09-08 17:05:00
#46
Originally Posted by Joekuh
Frame rail. It'd look dumb on the bumper IMO.

Yea.. When I get mine I want a star on each side
......Don't judge me -__-
2010-09-08 19:09:46
#47
Originally Posted by SWaGz_B14
Yea.. When I get mine I want a star on each side
......Don't judge me -__-


too late!
2010-10-01 23:25:35
#48
Originally Posted by Overkill
For the B14 guys, would you like it to attach to the rear bumper or to the rear frame rail? If you want the frame rail location it will need to be drilled into with two small 8-32 screws, which will be provided.

Mark


I'm down
2010-10-06 14:37:09
#49
I will get these made here shortly
2010-10-09 00:10:34
#50
Thanx!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top