Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: VE Cruise Bracket

+ Reply To Thread
Posts: 101-110 of 114
2010-06-11 01:34:38
#101
I had to grind a fair amout off of mine as well. I'll post pics sometime.
2010-06-12 02:35:41
#102
Originally Posted by cause4alarm
so i was just reading that there are 2 sr20ve idle air controal valves.... guess i got the wrong one.... 23781 5j210 acff005

purple plug from iacv hitting


unobstructed view of what i'm working with


notch it a bit where the finger is pointing and it should fit


i didn't like how wide the slots were compared to the size of the bolts on the motor so i changed out the washers


X2
I have the same exact problem as well. I notched the bracket but still having problems with the cables lining up correctly. I guess it's possible it could just be me:o?
2010-06-12 21:55:34
#103
just swap over your DE IAA valve, that's what worked for me with the latest bracket design
2010-06-15 19:55:33
#104
finally got off my ass and actually did this. ended up needing to take off more than i thought.... both the purple and the brown plugs on the iacv had clearence issues and also the extention on the intake for the bracket to the motor needed a little more clearence than was given.






i just tossed the cables in there (B14) without actually adjusting them and everything seemed like it would work out fine as far as placement
2010-06-17 04:38:52
#105
Originally Posted by cause4alarm
finally got off my ass and actually did this. ended up needing to take off more than i thought.... both the purple and the brown plugs on the iacv had clearence issues and also the extention on the intake for the bracket to the motor needed a little more clearence than was given.






i just tossed the cables in there (B14) without actually adjusting them and everything seemed like it would work out fine as far as placement



I didn't realize not everyone flipped the AAC Valve like I have on my engine when they installed their VE. Here's a pic of how I have it when it was still prototype.

2010-07-15 18:41:53
#106
Cause, your bracket is done. Shoot me your addy so I can get it out.

Mark
2010-07-16 15:01:55
#107
So has this been resolved then? Most of us didnt flip our iacv around, so it would be nice to have a stockish bracket done up.
2010-07-16 15:45:03
#108
It can be modified pretty easily. We suggest you modify it to your car. If you had it Powder Coated we will redo it for free.


Mark
2010-07-18 01:27:01
#109
I'll try flippping my valve around.
2010-08-12 16:18:30
#110
Price has gone up to $41?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top