Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: VE Cruise Bracket

+ Reply To Thread
Posts: 91-100 of 114
2010-05-11 01:52:43
All went well. The finished bracket was mixed up with a test bracket. After checking a few dimensions all is good. I will start shipping tomorrow.

2010-05-12 06:13:27
I need one of these, what type of powder coating comes on these? You said $29 for the brackets with coating, on your web-site it says + $10...
2010-05-12 12:15:06
The overall price was more than what we initially thought so we had to raise it a little by not including the pC. sorry.

2010-05-13 16:41:31
Installed on a B13. Thanks to Kimme and Joe for the use of their car for test fitting parts again..


2010-05-15 01:52:48
I can resurect the B14 cable to show it works with this bracket too...sweetnesss...can't wait.
2010-05-20 07:00:12
got my bracket, so i guess i have to permanently remove the right side head-to-intake manifold bracket in order to install this?
2010-06-09 18:59:59
so i was just reading that there are 2 sr20ve idle air controal valves.... guess i got the wrong one.... 23781 5j210 acff005

purple plug from iacv hitting

unobstructed view of what i'm working with

notch it a bit where the finger is pointing and it should fit

i didn't like how wide the slots were compared to the size of the bolts on the motor so i changed out the washers
2010-06-09 21:19:47
Its small things like this that make it harder and harder to make parts. I will change the drawing for the next batch of 20
2010-06-10 16:40:11
if i notch this myself and send it to you to take measurements will you refinish it for me?
2010-06-10 18:39:11
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top