Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Tubular front control arms

+ Reply To Thread
Posts: 271-280 of 363
2010-08-17 07:15:10
#271
Originally Posted by happynole
Guys both of these sets are going on my cars. 1 is going on the B14 at the shop, the other is going on my SE-R. Post up in this thread if you are willing to put your money where your mouth is. Mark can build more at this point since he has the blueprint, but I don't blame him for wanting money up front. I have used my gas and time to get cars there for Mark to build this stuff and when the time comes everyone disappears.

I did not dip, I just had questions. I have already bought some of his other products. Cool though.
2010-08-17 13:12:04
#272
Mevans, As you can see you and maybe one other person are interested in these. When the initial thread started there were close to 20 people interested. I will work you the same deal as all the other threads I have started. Get 5 people together here and I will make them. Lets see where that goes.

I will always make parts, but I can not do them close to what I am charging. I cant build a one off set of arms every time and charge the group rate. I hope this makes sense. I would build multiple sets at once, but if people scatter like they have, I cant be stuck with 20 sets of arms.

Mark
2010-08-17 13:32:00
#273
Where is the list? Mark me down for a set.
2010-08-17 13:45:40
#274
1.ALex SE R
2.
3.
4.
5.
2010-08-17 14:36:50
#275
Originally Posted by Overkill
1.ALex SE R
2.
3.
4.
5.


Mark is there a way to get both the arms and the bumpsteer kit together?
2010-08-17 15:06:25
#276
You have to buy the bumpsteer kit from Chuck. He is octotat I believe. The vendor name is boltinbars.

Mark
2010-08-17 16:05:25
#277
I should have money for them in a month or so, so then I'll be down for a set as well (with the revised front bushing accepting the Whiteline rear bushing). If we opt for no rear bushing we should subtract $25 from the total price?

Thanks.
2010-08-17 18:53:51
#278
Originally Posted by Overkill
You have to buy the bumpsteer kit from Chuck. He is octotat I believe. The vendor name is boltinbars.

Mark


Add me to the B13 revised front lower tubular arm list with the front bushing accepting the Whiteline rear bushing and with the protective covers/boots etc.
2010-08-17 19:24:24
#279
1.ALex SE R
2.Mevans
3.Jimithin7000
4.
5.
2010-08-18 00:28:55
#280
I sent you a PM but if you give me a few weeks I will sign up for the GB. Put me 3rd on the list.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top