Thread: Tubular front control arms

We can do a poly bushing if needed.

Mark

Mark, would this eliminate a chance of binding? If that is the case, this product would appeal to the broader customer base
Please also confirm if the price with the poly bushing would remain the same.

Thank you.

Yes it would be the same. It is not recommend but our edited design for the new rear bushing should allow enough movement for the front. But if using the whiteline bushing, it should work fine. We have not tested it so we can not be 100% certain

Mark

How is the one for the b14 coming along?

B14 and B13 are the same. Will have this other set of arms done to show that they do fit the B14 in a week or two

Mark, confused again with the above statement.

Haha, I should of rewrote it.

The arms will work better now with our new design for the rear bushing. The big question people are wondering is will these work with white line bushings. The answer to that is, I am sure they will but I am not going to say yes 100%. The arms were made to be used with camber/caster plates. This will give you the adjustment that you need to dial in the correct specs. Now I did not say they cant be used.

Okay, thanks.

Here are the parts to one arm. As you can see the new rear bushing is slotted so that the arms will have more give in one direction but still stiff as a rock in the other

Mark

Amazing