Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Tubular front control arms

+ Reply To Thread
Posts: 221-230 of 363
2010-07-26 18:52:24
#221
We did notice only positive things with these. On top of the fact that they are 1.8lbs lighter than factory that should only help with everything else.

The arms were designed to work around all sway bars. I personally dont know all the parts available and differences like most of you guys do. I am hoping that with these arms on joes car they should work well with everyone else set-up.

I will not lie, these arms are not the easiest thing to install. The delrin makes them very very hard to get into place. But none the less they do go in.

I will be building a few sets to work on his B14 and will take more pics then.

Mark-OEM
2010-07-26 20:14:04
#222
What is a bumpsteer kit. Who makes them for our b13's? Will a bumpsteer kit work with Marks tubular arms? Is there a difference in the suspension geometry between US and Japan assembled B13's?
2010-07-26 20:32:02
#223
Originally Posted by mevans
What is a bumpsteer kit. Who makes them for our b13's?

SR20 Community Forum - The Dash - Search Forums

Originally Posted by mevans
Is there a difference in the suspension geometry between US and Japan assembled B13's?
No.
2010-07-26 20:41:53
#224
Originally Posted by SERacer
Mark, send me a pair. i'll test it a Sebring in three weeks. Can't get a better test bed or location. If they survive the higher spring rates and the rough track of Sebring. We will know.


I will have your set done in a week or two. I cant wait to see if these can handle the stresses you can put them too.

mark
2010-07-26 21:05:40
#225
Originally Posted by mevans
What is a bumpsteer kit. Who makes them for our b13's? Will a bumpsteer kit work with Marks tubular arms? Is there a difference in the suspension geometry between US and Japan assembled B13's?


Chuck makes them, should be one or two vendors up. Check with him

Mark
2010-07-26 22:25:17
#226
Originally Posted by Overkill
Chuck makes them, should be one or two vendors up. Check with him

Mark

Okay Mark but who is Chuck?
2010-07-26 23:22:06
#227
http://www.sr20-forum.com/bolt-bars/30241-bumpsteer-kit.html
2010-07-27 01:46:48
#228
Originally Posted by Overkill

I will not lie, these arms are not the easiest thing to install. The delrin makes them very very hard to get into place. But none the less they do go in.

Mark-OEM


I guess I will have to bring my car up there and some beers when I get them so we can install them on your lift
2010-07-27 03:08:29
#229
Originally Posted by Overkill
I will have your set done in a week or two. I cant wait to see if these can handle the stresses you can put them too.

mark


Mark the race is Aug 7 & 8. I do not think We will have enoigh time to install the control arms, balance the car on the scales and align the car if you will be done in a week or two.
The Daytona race was cancelled and the Labor Day event was moved up to Aug. 7,8.
One day I would really like to test them out.

Andy R.
2010-07-27 07:19:30
#230

THX.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top