Thread: Tubular front control arms

We did notice only positive things with these. On top of the fact that they are 1.8lbs lighter than factory that should only help with everything else.

The arms were designed to work around all sway bars. I personally dont know all the parts available and differences like most of you guys do. I am hoping that with these arms on joes car they should work well with everyone else set-up.

I will not lie, these arms are not the easiest thing to install. The delrin makes them very very hard to get into place. But none the less they do go in.

I will be building a few sets to work on his B14 and will take more pics then.

Mark-OEM

What is a bumpsteer kit. Who makes them for our b13's? Will a bumpsteer kit work with Marks tubular arms? Is there a difference in the suspension geometry between US and Japan assembled B13's?

SR20 Community Forum - The Dash - Search Forums

No.

I will have your set done in a week or two. I cant wait to see if these can handle the stresses you can put them too.

mark

Chuck makes them, should be one or two vendors up. Check with him

Mark

Okay Mark but who is Chuck?

http://www.sr20-forum.com/bolt-bars/30241-bumpsteer-kit.html

I guess I will have to bring my car up there and some beers when I get them so we can install them on your lift

Mark the race is Aug 7 & 8. I do not think We will have enoigh time to install the control arms, balance the car on the scales and align the car if you will be done in a week or two.
The Daytona race was cancelled and the Labor Day event was moved up to Aug. 7,8.
One day I would really like to test them out.

Andy R.

THX.