Originally Posted by
Prodrifter Any thought on bumpsteer kits? Would pair up very nicely with the tubular control arms.
I have some ideas for a kit but have no way of making them. All we really need is a conical insert for the spindle then replace the OEM tie rod end with a heim joint and use a 12mm bolt to hold it together. you can put in the spacers you want and this would also allow you to flip it over and put it on the bottom side. You need the part that sits in the spindle and heim joint to not have threads as the other kit out there did.
At this point i am thinking of tapering the hole in the spindle to match a set of mustang inserts i found and finding the hardware. There are lots of "flip kits out there" but i can not find any that work for us.