Thread: Product Update: LCA Bar V1 and V2

Cause: What is wrong with your order?

i just want the solid endlink, i've had it on for months with the other ones and it's rattling around like a bastard,

sent a pm to you bluebomber and an email with no response

Yeah Blue is pretty busy right now. Send back the right hand threaded joint and I will shoot you a solid eye out same day.

Mark

so i gotta take this **** out my car....... i'll have a day off come late next week.

Cause, I will ship you out another eye end, next time bring it to a PM.

Mark-OEM

This why I post pics. I have nothing to hide. I just want to finally install this bar it's been a long 7 months of trying to get this order right. I am very upset myself.

Man I could have sworn that I sent you an eye joint. Well I just sent the last one to Cause, so give me a couple days and it will be right out to ya.

Mark

I got the Solid link in the mail that you sent me. Thanks.

Got my bar in the car today.

Overall I am happy with the purchase. However I was dissapointed to see the $15 bolts I ordered did not come with matching nuts, and given they were not matching thread pitch of the oem bolts, I still had to make a trip to the store and search down proper nuts.

I was also a little concerned because the endlinks had to be turned out considerably far on each end leaving less then 3/4" of thread contact on each side, hopefully that will not be a problem down the road.

At any rate, car feels better going into turns and just feels better in the turn, with noticeably less slop. I have new lower control arms and balljoints with wheel bearings in decent shape so there was not much slop to begin with.

The piece also clears my asp budget header with room to spare. Ground clearance shouldn't be an issue as this sits between the wheels anyways.

I would recommend this product.

Dudeman

Dudeman, The bolts are 14x1.5mm. Thats factory size and pitch. Maybe someone replaced them before hand.

Mark