Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Product Update: LCA Bar V1 and V2

+ Reply To Thread
Posts: 71-80 of 201
2009-10-04 23:18:16
#71
if they use a regular eyelet instead of the heim joints they should be able to include hardware and still offer it at the same price


mine has not shifted yet, i did use big washer to limit movement and tightened the crap out of it. i don't drive that car super often i'll check it out again in a week or so and get back on that.
2009-10-05 05:25:17
#72
Originally Posted by MR-4Door-SR20DET
^No. I was waiting to see how it was going to play out. Not looking to cool with that move. I'll keep my $160 for now. Planned on buying two of them.


I don't want to lose any bussiness for the guys MR..Forum supporters are hard to find but... I just curious how I was going to install the bar with no bolts?
Originally Posted by TheRealNighthog
You cant find your own hardware? I understand what you mean however, look at
what you are getting for 80 bucks. They dont say that it includes hardware. I would just go down to a Fastenal or other fastener store and get bolts of your own.


What's the recommended thread size/pitch and grade of bolt to use...?? There is no info listed........Well...looks like it's just easier to pony up the $8 dollars for the bolts....Just confused why not just charge $88 for the bar and have no hassles? I am still confused about this one......
2009-10-05 05:31:57
#73
I would use a grade 10.9 bolt. I have no idea what size the bolts are though.
2009-10-05 21:39:25
#74
Brace moves front to back by hand a tad.... solid endlinks and re locateing it to the other side of that bracket should be in my future.
2009-10-06 18:42:55
#75
Ok guys for the new ones we will be including bolts and one solid joint so that the bar does not move. Jay I will be sending you one for testing, please let me know how it works out. We could not do 2 solid joints as they do not come in a left hand thread.

Mark-OEM
2009-10-06 20:13:54
#76
what's the thread for the endlinks?
2009-10-07 05:24:49
#77
Originally Posted by Overkill
Ok guys for the new ones we will be including bolts and one solid joint so that the bar does not move. Jay I will be sending you one for testing, please let me know how it works out. We could not do 2 solid joints as they do not come in a left hand thread.

Mark-OEM


Another time asking for the bolts
2009-10-07 17:36:59
#78
topdog, I can send you a set out since you are having no luck. You just need a 1" or 20-25mm longer bolt.

Mark
2009-10-07 20:07:03
#79
Originally Posted by Overkill
Ok guys for the new ones we will be including bolts and one solid joint so that the bar does not move. Jay I will be sending you one for testing, please let me know how it works out. We could not do 2 solid joints as they do not come in a left hand thread.

Mark-OEM


Awesome,Mark.
Can you please send my original bolts too,if you still have them.I would like to have those incase I remove the bar for any reason.
Thanks!!
I was also wonderng(as are others) if you have had a chance to work on the Cruise bracket we talked about for the VE.

Jay
2009-10-08 13:01:19
#80
Thats next on my list. I was looking at the drawing yesterday. Soon, very soon.

Mark
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top