Thread: Spacers

We now have wheel spacers for sale.

5mm thick spacers with hub centric backs: $65 / pair or $125 / set of 4

Larger bore hub centric spacers: $125+ / pair

Email or pm for exact pricing on larger bore spacers and different thicknesses.
[email]Info@OverkillEngineeringMotorsports.com[/email]

http://www.overkillengineeringmotorsports.com/wheelspacers.html

these available??

do they come with studs?

Mine didn't.

No, why would you need studs on a 5mm thick spacer? If you were going with a 15-20 mm then yes.

do you have 10mm hubcentric spacers ?

or is that to much ?

stratton.

There is no way to make a "bolt on" 10mm hubcentric spacer for our cars. You can read in detail why in this thread:
http://www.sr20-forum.com/general-sr20/20340-need-advice-wheel-spacers.html#post264473

I think Overkill has 15mm hubcentric spacers but not 100% sure.

ahh haa my friend. We now make hub extenders. They go into the hub and come out to the hub diameter or better yet ... any diameter to fit custom wheels.

We just did this on Mark's Sunfire after installing a new custom Wilwood kit we made.

That's a good idea!
So you can get 10mm spacers and the hub extenders and be all set?
Do they protect the rear bearings from debris just like the OEM dust sheilds?
How do they clear up front with the axle nut?

they way we have them on the sunfire they are open on the end to ensure we can get to the axle nut at the track. It is possible to make them closed as well.